Penilaian Risiko dengan Metode HIRADC Pada Pekerjaan Konstruksi Gedung Kebudayaan Sumatera Barat

Taufiq Ihsan, Sarah Azzahra Hamidi, Febyta Amanda Putri

Abstract


Occupational Health and Safety really needs to be a consideration for industry in order to avoid work accidents. Accident prevention can be done by analyzing existing risks, one of which is the HIRADC method, namely identifying hazards (Hazards Identification), assessing risks (Risk Assessment) and controlling risks (Determining Control). This study aims to conduct a risk assessment in the Zone B Phase II project of the West Sumatra Cultural Building. As a managing contractor for the project, PT. X, which is a company in West Sumatra engaged in construction, has tried to prevent work accidents from occurring. However, in the implementation of this project, 12 work accidents were recorded for each of the three types of work, namely ironwork, formwork, and scaffolding. The results of the assessment obtained in the West Sumatra Zone B Phase II Cultural Building construction project have a significant risk. Significant risks need to be considered by contractor management and take corrective action. Recommended improvements are engineering, administrative controls, and use of Personal Protective Equipment.


Keywords


Risk Analysis; Occupational Hazard; HIRADC; Construction

Full Text:

PDF

References


Aerrosa, M, M. 2020. Penggunaan HIRARC dalam Identifikasi Bahaya dan Penilaian Risiko pada Pekerjaan Bongkar Muat. HIGEIA (Journal of Public Health Research and Development), 4 (2): 245-255.

Ahmad, C. A, Zin, I. N. M., Wahid, A. M. A., & Kamar, I. F. M. 2016. Hazard and risk of highway maintenance: case study of PLUS Expressways. In The 4th International Building Control Conference 2016, MATEC Web of Conferences, 66 (106), 1-7.

Al-Ajmi, H. F., & Makinde, E. 2018. Risk Management in Construction Projects. Journal of Advanced Management Science, 6 (2): 113-116.

Albert, A., Hallowell, M. R., & Kleiner, B. M. 2014. Emerging strategies for construction safety & health hazard recognition. Journal of Safety, Health & Environment Research, 10 (2): 152-161.

Andhini, D.P., Sugiono., & Remba, Y.E. 2015. Implementation of Job Safety Analysis (JSA) in Prevention Work Accident (Case Study: PT. Adi Putro Wirasejati). Jurnal Rekayasa dan Manajemen Sistem Industri, 3(2): 386–396.

Cakmak, P. I., & Tezel, E. 2019. Risk Management in Construction Projects, Nthatisi Khatleli, IntechOpen, DOI: 10.5772/intechopen.84361. https://www.intechopen.com/books/risk-management-in-construction-projects/a-guide-for-risk-management-in-construction-projects-present-knowledge-and-future-directions

Gallagher, C., & Underhill, E. 2017. Managing work health and safety: Recent developments and future directions. Asia Pacific Journal of Human Resources, (5):227–244.

Hola, B., & Szóstak, M. 2014. Analysis of the Development of Accident Situations in the Construction Industry. Procedia Eng, 91:429–434.

Ihsan, T., Edwin, T., & Octavianus R. I. 2016. Analisis Risiko K3 dengan Metode HIRARC pada Area Produksi PT Cahaya Murni Andalas Permai. Jurnal Kesehatan Masyarakat Andalas, 10(2): 179-185.

Ihsan, T., Safitri, A., & Dharossa, D. P. 2020. Analisis Risiko Potensi Bahaya dan Pengendaliannya dengan Metode HIRADC pada PT. IGASAR Kota Padang Sumatera Barat. Jurnal Serambi Engineering, 5 (2): 1063-1069.

In-Ju, K. 2017. The Role of Ergonomics for Construction Industry Safety and Health Improvements. Journal of Ergonomics, 07. 10.4172/2165-7556.1000e166.

Irzal. 2016. Dasar-Dasar Kesehatan dan Keselamatan Kerja: Edisi 1. Jakarta: Penerbit Kencana.

Jannah, M.R., Unas, S.E., & Hasyim, M.H. 2017. Analisis risiko Keselamatan dan Kesehatan Kerja (K3) melalui pendekatan HIRADC dan metode job safety analysis pada studi kasus proyek pembangunan menara x di jakarta. Jurnal Mahasiswa Jurusan Teknik Sipil. 1(2): 1-8.

Landage, A. 2016. Risk Management in Construction Industry. International Journal of Engineering Research, 5:153-155. 10.17950/ijer/v5i1/035.

Prihatiningsih, S., & Suwandi, T. 2014. Penerapan Metode HIRADC Sebagai Upaya Pencegahan Kecelakaan Kerja Pada Pekerja Mesin Rewinder. The Indonesian Journal of Occupational Safety , Health and Environment, 1(1): 73-84

Purohit, D. P., Siddiqui, N. A., Nandan, A., & Yadav, B. P. 2018. Hazard Identification and Risk Assessment in Construction Industry. International Journal of Applied Engineering Research 13(10): 7639-7667.

Rout, B. K., & Sikdar, B. K. 2017. Hazard Identification, Risk Assessment, and Control Measures as an Effective Tool of Occupational Health Assessment of Hazardous Process in an Iron Ore Pelletizing Industry.Indian J Occup Environ Med, 21(2): 56–76.

Rubio-Romero, J., G'amez, C. R., & Carrillo-Castrillo, J. 2013. Analysis of the safety conditions of scaffolding on construction sites. Safety Science, 55:160--164.Saeed, Y. 2017. Safety Management in Construction Projects. The Journal of The University of Duhok, 20:546-560.

Salami, I. R. S. 2016. Kesehatan dan keselamatan lingkungan kerja. Cetakan kedua. Yogyakarta: UGM Press.

Sari, R. M., Syahputri, K., Rizkya, I., & Siregar, I. 2017. Identification of Potential Hazard using Hazard Identification and Risk Assessment. IOP Conference Series: Materials Science and Engineering, 180(1). doi. https://doi.org/10.1088/1757-899X/180/1/01212

Shamsuddin, K. A., Ani, M. N. C., Ismail, A. K., & Ibrahim, M. R. 2015. Investigation the Safety, Health and Environment (SHE) protection in construction area. International Research Journal of Engineering and Technology, 2(6):624–636.

Shamsuddin, K.A., Norzaimi, C.M., Che-Ani, A.I., & Ismail, A.K. 2015. Investigation the effective of the Hazard Identification, Risk Assessment and Determining Control (HIRADC) in manufacturing process. International Journal of Innovative Research in Advanced Engineering (IJIRAE), 2(8): 80-84.

Sharma, A., Kumar, A., & Suryawanshi, V. 2015. Hazard Identification and Evalution in Construction Industry. International Journal of Science Technology & Engineering, 1(10):47-56

Suárez-Sánchez, F. A., Carvajal-Peláez, G. I., & Catalá-Alís, J. 2017. Occupational safety and health in construction: a review of applications and trends. Industrial health, 55(3):210–218.

Tarwaka. 2014. Keselamatan dan Kesehatan Kerja (K3): Manajemen dan Implementasi K3 di Tempat Kerja. Edisi II. Surakarta: Harapan Press.

Wu, P., & Wang, X. 2019. Innovative Production and Construction: Transforming Construction Through Emerging Technologies.Singapore: World Scientific Publishing.

Wu, C., Wang, F., Zou, P.X.W., & Fang, D. 2016. How safety leadership works among owners, contractors and subcontractors in construction projects. International Journal of Project Management, 34:789-805.

Yakubu, D. M., & Bakri, I. M. 2013. Evaluation of Safety and Health Performance on Construction Sites (Kuala Lumpur). Journal of Management and Sustainability, 3(2). doi:10.5539/jms.v3n2p100.

Zin, S., & Ismail, F. 2012. Employers’ behavioural safety compliance factors toward occupational, safety and health improvement in the construction industry. Procedia-Social and Behavioral Sciences, 36:742-751.




DOI: http://dx.doi.org/10.33087/civronlit.v5i2.67

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Civronlit Unbari
Publisher: Fakultas Teknik Universitas Batanghari Jambi
Jl. Slamet Ryadi, Broni-Jambi, Kodepos: 36122, Phone: 0741-668280, email: civronlit.unbari@gmail.com

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.